Which printer?

[Kram]

Anyone have experience printing nylon or abs without a heated enclosure? Most of them claim they will do it, but does it work smoothely out of the box?
If so I will likely buy the P2S AMS combo.

I note that will Bambu list the engineering grade filaments, the other manufacturers generally dont, which makes me think Bambu will be best for that.

 

[Pete.]

I wouldn't have any printer without an enclosure now.

 

[Kram]

I worded that badly. It will have an enclosure but some are not heated. P2S being the example.

 

[Onoff]

@ukracer I believe prints successfully in ABS predominantly?

You really want an enclosure and good fume venting with ABS, it's not pleasant inside.

ASA as an alternative is worth looking at.

 

[iNf]

I have the p1s plugged into a smart plug. When printing abs I turn the printer on from my phone/ tablet and put the heated bed on for about 5 minutes before printing to heat the chamber. Always print abs with a skirt to help prevent lifting. The printer is in my workshop/ garage so I don't notice any fumes but might be a problem if you plan on having the printer indoors. The printer comes with a carbon filter as standard.

 

[knighty]

I've only ever printed with ABS, never had a heated enclosure - when I first build a 3d printer I read ABS was the strongest material so I bought that and stuck with it

used to print without an enclosure, was ok for small stuff, with bigger stuff or longer prints and enclosure is needed

with my first printer, probably 10 years ago (they were pretty basic back then) I'd turn the heated bed on for a while to heat the enclosure for a while before I set it printing

new printer (prusa mk4) I just set it printing and forget about it


for both printers I've made one of these enclosures from an Ikea table

Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research by Dom Cis | Download free STL model | Printables.com

 

[Bladevane]

I recently bit the bullet and bought some ABS to print on my Prusa MK3.5. I made a tent using a very large see-through plastic bag and preheated the bed to get the temperature of the enclosure up. I also cleaned the print plate thoroughly and printed with a skirt to aid first layer adhesion. No problem. I don’t intend to print much in ABS so my enclosure system will be used again when I need it.

 

[Kram]

Anyone tried nylon, PA6, PA6CF? Theres some parts I want good heat resistance.

 

[Kram]

I run all the printers via standard Orca, now. I don't bother using the manufacturers version.

Looks like Bambu ties you to using Bambu studio while others can use Orca. Whats the difference?

Is the p2s heated enclosure? I have heard too many problems with H2S.

Printer problems or printing problems?

 

[MattF]

Looks like Bambu ties you to using Bambu studio while others can use Orca. Whats the difference?

The printer firmware.

 

[fizzy]

I love my Elegoo Neptune 3 MAX. Works perfectly and will print huge. Think of something like a traffic cone or breeze block in size

They have a sale on at the moment for the newer Neptune 4 max - hell of a bargain. £285!
I always buy off their own online shop. Great service.

ELEGOO Neptune 4 Max FDM 3D Printer

ELEGOO Neptune 4 Plus FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size

uk.elegoo.com

 

[fizzy]

They also do some really huge ones - this one is almost IBC size

prints 800x800x1000

Elegoo OrangeStorm Giga - Best Large FDM 3D Printer 2024

Discover the Elegoo OrangeStorm Giga, the best large 3D printer of 2024 at an affordable price. Enjoy multi-nozzle FDM printing for all your big projects now.

uk.elegoo.com

I could start printing my own pallets

 

[MattF]

I always buy off their own online shop. Great service.

Same here. Makes it easier if you need to contact them too, dealing direct.

That Neptune 4 Max I got, I am impressed with. Few teething issues, but nowt which couldn't be sorted. Can't fault the prints from it.