whats the best genny

[kettle on!]

Hi folks,Im going to be using a clarke 135 te mig in the middle of nowhere!and i need a compatable generator,can anyone recommend a good choice?what size will i need etc,many thanks.

 

[steeo]

Not a good idea to run any sort of welder mig/arc or tig off a genny as they require too much amps. I tried to run a 130amp arc welder off a 6.5Kva genny and it wasn't successful.
Also if you are welding in the middle of no where I presume its outside so would it not be better to use something like a genny welder ???

 

[kettle on!]

A genny welder!!not more tackle ill use only occaisionally!iwas wondering if it was possible! only the chaps that did my iron railings turned up and fired an old genny up and tacked everything inplace,i never got the specs of them,as usuall theres a budget so what ever i can get away with!!!and yes i know you get what you pay for.cheers

 

[steeo]

Hire one, I can get a 250amp one here for €40 plus vat a day.

 

[steeo]

http://www.mig-welding.co.uk/forum/showthread.php?t=8965

Check the thread above for a little more info.

 

[kettle on!]

thanks mate,so i need atleast a 6.5kva genny,.......................ebay.

 

[Justme]

Get a decent genny & you will be fine. I have a 6kva genny (£2.5k not £200) & it runs my 210amp mig fine.

 

[zzr1200]

i need a compatable generator,can anyone recommend a good choice?

Honda engine + Markon Alternator.

what size will i need etc,many thanks.

6.5 KVA Min output (higher the better)

 

[m1ecy]

Really you need something a little better than a Honda lump.....

if the genny turns at 3000 rpm (most of the cheaper ones do) then it will not be particularly good for running a welder.

Look for one that runs at 1500 rpm (or less) and has a decent diesel lump - this will be able to supply a much more stable current for your welder

Trust me, I'm a Generator engineer!

HTH
Sean