The Artilleryman
Member
- Messages
- 449
- Location
- Boston UK
Recently I've missed out on a couple of welding tables.
So I've decided to make my own.
As it will be roughly 1.5M x 1M is there any advantage in using 10mm sheet as against the usual 6mm ?
Do I make one with a solid sheet or is there any advantage in have loads of holes ?
Anything else I should be thinking about ?
So I've decided to make my own.
As it will be roughly 1.5M x 1M is there any advantage in using 10mm sheet as against the usual 6mm ?
Do I make one with a solid sheet or is there any advantage in have loads of holes ?
Anything else I should be thinking about ?