WANTED 13 inch Wheels 5 stud 114.3 PCD 0 offset

OJCar · Friday at 1:25 PM

I'm looking for two or three 13 inch wheel rims 5 stud 114.3mm (4.5") PCD 0 offset .
( to replace the two on my trailer that were damaged when a "friend" borrowed it... :vsad:

).

I've been struggling to find any on this side of the Atlantic, which is stupid as it is a British built trailer.

RWD3M · Friday at 1:39 PM

13"X4.5J 5-Stud 112mm Wheel-Rim

13"X4.5J 5-Stud 112mm Wheel-Rim - Steel with silver finish trailer wheel rim - 112mm PCD Pattern, 5 Stud 4.5J 13 Inch Rim

www.towingandtrailers.com

OJCar · Friday at 1:51 PM

RWD3M said:
13"X4.5J 5-Stud 112mm Wheel-Rim

13"X4.5J 5-Stud 112mm Wheel-Rim - Steel with silver finish trailer wheel rim - 112mm PCD Pattern, 5 Stud 4.5J 13 Inch Rim

www.towingandtrailers.com

Those are 112mm PCD.
I need 114.3mm (4.5") PCD rims.

( I know 2.3mm is not much of a difference but No, I'm not filing them bigger!
- that is effectively what the "friend" has ... etc )

RWD3M · Friday at 2:42 PM

OJCar said:
Those are 112mm PCD.
I need 114.3mm (4.5") PCD rims.

( I know 2.3mm is not much of a difference but No, I'm not filing them bigger!
- that is effectively what the "friend" has ... etc )

Actually, good spot. I think I was blind sided by the 4.5J!

RWD3M · Friday at 2:51 PM

This is a bit of a teaser!

Do you know who made it?

colnerov · Friday at 3:02 PM

Here's your starter for ten.

https://www.wheelfitment.eu/pcd/5x114.3.html

Pick your centre bore size and it lists the vehicles that used it. 64.1, 70.1, and 70.3 Have 0 offset versions, but it doesn't list the wheel sizes. So do your own research.

OJCar · Friday at 3:17 PM

RWD3M said:
This is a bit of a teaser!

Do you know who made it?

Yes, I have reached out to the trailer maker, Phoenix, to find out their price, but not had a reply yet.

OJCar · Friday at 3:18 PM

colnerov said:
Here's your starter for ten.

https://www.wheelfitment.eu/pcd/5x114.3.html

Pick your centre bore size and it lists the vehicles that used it. 64.1, 70.1, and 70.3 Have 0 offset versions, but it doesn't list the wheel sizes. So do your own research.

Thank You! :thumbup:

Runs outside to measure centre bore

OJCar · Friday at 3:31 PM

Centre Bore is 73.75mm !

71.6mm TVR Cerbera wheel and a file???

CompoSimmonite · Friday at 4:28 PM

You could always try https://wellerwheels.com/ and get them to drill your PCD as they will custom make.

Smallfry · 2025-07-20T08:51:26+0100

Are you sure the PCD is not 115mm ?