Jlg Member Messages 2,540 Location Cumbria Jun 28, 2020 #1 What’s a decent budget vinyl cutter for cutting out stickers and decals
grim_d Unlikeable idiot. Messages 4,218 Location Scotland - Ayrshire Jun 29, 2020 #2 Depends on size and budget really, Roland and mimaki are the two that spring to mind. Can get them from desktop size to about 1600mm width capability.
Depends on size and budget really, Roland and mimaki are the two that spring to mind. Can get them from desktop size to about 1600mm width capability.
Jlg Member Messages 2,540 Location Cumbria Jun 29, 2020 #3 I was th grim_d said: Depends on size and budget really, Roland and mimaki are the two that spring to mind. Can get them from desktop size to about 1600mm width capability. Click to expand... in something like 400 mm but don’t want to spend a lot
I was th grim_d said: Depends on size and budget really, Roland and mimaki are the two that spring to mind. Can get them from desktop size to about 1600mm width capability. Click to expand... in something like 400 mm but don’t want to spend a lot
graffian Seer unto the end of his beard Messages 3,636 Location gatwick Jun 29, 2020 #4 630[?] is a better width, most of the vinyl seemed to come in 630mm rolls. I bought a Pcut, cos it was very cheap. I cut some lettering that was less than 2mm high, seemed to work OK at that.
630[?] is a better width, most of the vinyl seemed to come in 630mm rolls. I bought a Pcut, cos it was very cheap. I cut some lettering that was less than 2mm high, seemed to work OK at that.
carbon Member Messages 2,784 Location S. Glos. U.K Jun 29, 2020 #5 I think standard width rolls are 305 and 610 mm wide