UPVC door flag hinge adjustment

[Welderpaul]

Neigbhbours door hinge. I really shouldn't get involved with these things, I have enough on, but she's nice

Its a pair of french doors and i need to move this leaf out/away from the centre. I.e to the left of the photo. Do I undo the two zinc allen screws then turn the centre pin to the left or right. I assume the two cream coloured screws are not adjusted?

I'd rather know which way things are supposed to go before entering the endless loop of twiddling allen screws.

Ta

 

[roofman]

looking at it..plus or minus 3mm either way. with having 4 slots ime guessing all 4 need nipping off

 

[mtt.tr]

Dependent on design. Some the zinc screws are the mount and the small screws just lock the upper plate to the lower.

 

[zx9]

I have not got a clue, I would just mark the position of all the screws to give me a known position to return to and experiment.

 

[MattF]

I have enough on, but she's nice

Nice as in pleasant, or tasty?

 

[Seadog]

The hinges have eccentric pivots. Accessible by removing a plastic cap at the top.

 

[colnerov]

I was going to say it will need three bits for the fixings, one for the painted screws, one for the plated Allen screws and another for the centre adjuster. But if Seadog is right it will another for the pivot pin grub screw and whatever the pivot pin needs.

Colin

 

[GrahamGKD]

Funny, I was fiddling with ours yesterday. Seadog mentions the eccentric pivots from the top - ours has that but (in our case - Trojan hinges) that also throws the door away from or closer towards the frame. If you just want to shift the door across in the frame I think you use the +3, -3 eccentric but you will need to slacken the screws that hold the hinge to the door - in our case that was four screws - looks like your bright alen screws but where do the two painted screws go - looks like they are too far across to go into the door. Also, not sure about that grub screw - where does that go.

I figured out the make of our hinges and found a decent youtube on them but they are different to yours.

 

[RajkumarMaharjan]

Neigbhbours door hinge. I really shouldn't get involved with these things, I have enough on, but she's nice

Its a pair of french doors and i need to move this leaf out/away from the centre. I.e to the left of the photo. Do I undo the two zinc allen screws then turn the centre pin to the left or right. I assume the two cream coloured screws are not adjusted?

I'd rather know which way things are supposed to go before entering the endless loop of twiddling allen screws.

Ta

View attachment 355624

I need 3 pcs of these, does anyone have or can any one suggest where it can by buy?