brightspark
Member
- Messages
- 41,458
- Location
- yarm stockton on tees
3 mysteriously fell off when i was working on a new 3 phase dbThe seals are always missing...
- Thread starter LewisT
- Start date
Looks just like my home install when I moved in. It's probably live, if you don't mind telling people, the DNO (UKPN) came out for free and checked out was all live, and then between them and the supplier (octopus) got it all set up for free. Downside, has resulted in buying two big machines. So far...
Bumping my own thread but the seals were missing on the two other phases
Jammy bugger!
Theres a 3 phase pole behind my barn in my field. To get it into my barn was going to be £17.5k plus VAT. And me doing all the trenching
Looks like a phase convertor incoming. And careful management lof loads.
When we built our extension 20 years ago we had a single phase supply & had to get it disconnected & a temp supply put in while the works were being done.
EDF Lady engineer came round to price the job. Temp supply then fit new single phase supply, £387. I looked up at the pole & remarked "Thats 3 phase up there, How much for a 3 phase supply?" She asked why i wanted 3 phase so i explained lathe & mill etc & she said "That will be £487".
Result!!!
EDF Lady engineer came round to price the job. Temp supply then fit new single phase supply, £387. I looked up at the pole & remarked "Thats 3 phase up there, How much for a 3 phase supply?" She asked why i wanted 3 phase so i explained lathe & mill etc & she said "That will be £487".
Result!!!
