tca ajuster what material to use

[whensparksfly]

what material are tca ajuster made from?cant get ones I want will have to get them made

 

[brightspark]

tca ???

 

[the snooper]

tca ???

thingymabob crank adjuster I though everyone knew that

 

[whensparksfly]

track control arm adjuster

 

[normspanners]

what material are tca ajuster made from?cant get ones I want will have to get them made

TCA adjusters are normally en 24t type material IIRC
what car is it ?

 

[whensparksfly]

a escort rally car the adjusters you buy are too small diameter for what I want.where would I get it

 

[normspanners]

I had the same problem, are they bending?, I had one snap on me, braking through a large compression on a test stage, sent me off through a fence, I had increased the track by about 50mm a side, had used the usual weld in adjusters then got some supposedly dogs ones, and they both bent, I made my own and they where ok even stood Reykjavik icelands stages with no problems.

 

[normspanners]

another

The last bit of the vid she is flat in fith on the rev limiter just under 10,000 rpm

 

[whensparksfly]

Did you use en24t any pics great video s

 

[Fazerruss]

what material are tca ajuster made from?cant get ones I want will have to get them made

Have you tried rally design?

 

[normspanners]

I still have some old units somewhere, I think OTTOMH I used right hand thread 18mmx1.5 mm female threaded sockets welded to the tca after cutting off the inner ring, then made a M/F threaded adjuster and used left hand thread 5/8 unf rose joint, the two pitches are virtually the same so the rose joint shaft was actually inside the tca but as you turn the adjuster it did the double action required for easy camber adjust.

 

[normspanners]

Yes 24t btw

 

[Master-of-none]

Try Burton Power http://www.burtonpower.com/

 

[whensparksfly]

Can you weld the 24t or do you use a different grade

 

[Tinbasherdan]

Norm, that mk2 is absolute filth! I would love one, but sadly nowadays the prices are just too ridiculous even for a project for me to be able to ever consider as a weekend toy