Stuff you have made today

Hood · Oct 17, 2018

It took a while but got finished fitting the mast and wiring up the lights etc.
Pics not great as it was starting to get dark.
Personally I would have had the aerials sloping with the mast but the skipper wanted them more upright.

Hood · Oct 17, 2018

s hearn said:
love been on the seafront

I don't think I could settle if I was away from the coast.

Hood · Oct 17, 2018

Something different for me, I was asked this morning by the Boatyard to design a staircase. So sat down a few hours ago to see what I could come up with. I have never done anything like this before but the house builder wanted steel sides and also didn't want a spiral stair but wanted an angular type of design. The space seemed a bit tight to me at first but I have something worked out, will just have to see if it is what they want, if so then the plasma will be used to cut out the sides.

wookie · Oct 17, 2018

Hood said:
Personally I would have had the aerials sloping with the mast but the skipper wanted them more upright.

Smart skipper, sod the "go faster look" of windswept antennas, having them vertical means they work better.

selectedgrub · Oct 18, 2018

Yes, but you are still getting it done.
All the best.

cardiffrob · Oct 18, 2018

mrsbruce said:
Found even more tools I never knew the hubby had.

I think that 99% of blokes on here live in fear of being 'found out' and having to lie about the cost. "Nah, had that for years, Honey. Got it for a fiver."

Scruffywelder · Oct 18, 2018

cardiffrob said:
I think that 99% of blokes on here live in fear of being 'found out' and having to lie about the cost. "Nah, had that for years, Honey. Got it for a fiver."

Went into a bike shop a couple of years back that had a wee sign by the till saying that if you stuck a fiver in the charity tin on the counter they'd give you a receipt for the amount you'd told your wife you'd spent on bike bits :laughing:

steve t · Oct 18, 2018

Hood said:
Something different for me, I was asked this morning by the Boatyard to design a staircase. So sat down a few hours ago to see what I could come up with. I have never done anything like this before but the house builder wanted steel sides and also didn't want a spiral stair but wanted an angular type of design. The space seemed a bit tight to me at first but I have something worked out, will just have to see if it is what they want, if so then the plasma will be used to cut out the sides.

View attachment 156797

Looks a tricky one

Pete. · Oct 18, 2018

I'm knocking out some arbor blanks for my gear hobbing machine. These bits hold the gear blanks for cutting. The Mikron uses a bespoke taper and it's taken be several attempts to get the compound set just right so now I've got it set I'm going to churn out a handful of arbors.

Making them from 316 stainless because I happen to have a couple of scrap lengths of it, you get a lovely finish straight off the tool and you never have to worry about it rusting.

MattF · Oct 18, 2018

s hearn said:
LOTSAWORK, did you consider a pole with treads going around it and up?

That would be a spiral staircase, which they don't want.

rtbcomp · Oct 19, 2018

Made a handle for Round bed #2

https://www.mig-welding.co.uk/forum/threads/drummond-round-bed-lathe-2.85945/ Post #7

wookie · Oct 19, 2018

Finally got my latest version of a press brake finished (or at least usable) now I can do folds up to 1m long.

The hardest part is making the bottom vee but I had a cunning plan and it worked a treat.

slim_boy_fat · Oct 20, 2018

Slow & sure, Stuart. :thumbup:

slim_boy_fat · Oct 20, 2018

s hearn said:
I sometimes wonder whether I will make it I have all this equipment and my son's don't know how to use it and they don't care much either

I know the feeling. My best mate was visiting recently [before he knew about the in-coming milling machine! :whistle:

] and we were out in the shed. After looking about for a minute he asked what was going to happen "to all this stuff" - my reply? "I don't care, I'll be dead" [my family are like yours, they don't understand and certainly won't want to keep any of the 'stuff'.

Today if the weather behaves I will mostly be trying to smooth off the first coat of knifing putty from a very small patch at the bottom of the boot lid on the car, watching the qualifying of the F1 GP then catching up on other jobs before I collapse through lack of sleep. I'm like the Duracell Bunny for part of the day, then.......

Friday nights I'm lucky to get a couple of hours because of steroids I have to take on Fridays - just can't switch my brain off, which is apparently a known side effect of this particular drug. It also accounts for the list of 'projects' I've acquired...... :rolleyes:

But hey, it's helping to keep me alive! :thumbup:

eLuSiVeMiTe · Oct 20, 2018

slim_boy_fat said:
I know the feeling. My best mate was visiting recently [before he knew about the in-coming milling machine! ] and we were out in the shed. After looking about for a minute he asked what was going to happen "to all this stuff" - my reply? "I don't care, I'll be dead" [my family are like yours, they don't understand and certainly won't want to keep any of the 'stuff'.

Today if the weather behaves I will mostly be trying to smooth off the first coat of knifing putty from a very small patch at the bottom of the boot lid on the car, watching the qualifying of the F1 GP then catching up on other jobs before I collapse through lack of sleep. I'm like the Duracell Bunny for part of the day, then.......

Friday nights I'm lucky to get a couple of hours because of steroids I have to take on Fridays - just can't switch my brain off, which is apparently a known side effect of this particular drug. It also accounts for the list of 'projects' I've acquired......

But hey, it's helping to keep me alive!

Think il be ok on that score.
3 boys 7,4 and 18 months. There all in awe of the garage and tools and show keen interest in it.

Eldest has his sights set on some kind of engineering.

slim_boy_fat · Oct 20, 2018

eLuSiVeMiTe said:
Think il be ok on that score.
3 boys 7,4 and 18 months. There all in awe of the garage and tools and show keen interest in it.

Eldest has his sights set on some kind of engineering.

Catch 'em young is definitely the answer. :thumbup:

wookie · Oct 20, 2018

eLuSiVeMiTe said:
3 boys 7,4 and 18 months. There all in awe of the garage and tools and show keen interest in it.

I was thinking that about my cousin's youngest, he loves military vehicles, so I was planning on leaving my jeep to him when I die, I've took him out in it a few times and he's always had a blast. Sadly now his mum reports he's lost all interest in it as he's found out about girls... :doh:

MattF · Oct 20, 2018

wookie said:
I was thinking that about my cousin's youngest, he loves military vehicles, so I was planning on leaving my jeep to him when I die, I've took him out in it a few times and he's always had a blast. Sadly now his mum reports he's lost all interest in it as he's found out about girls...

Girls eventually lose their appeal. Boys toys don't.

Morrisman · Oct 20, 2018

MattF said:
That would be a spiral staircase, which they don't want.

I designed a spiral staircase up to the third floor in the house we built in the Philippines. Drew it all up to scale in Sketchup, but at the last minute decided against it.

And I was so glad eventually. Going up and down a spiral staircase is a pain after the novelty wears off. Carrying things up one is a chore, moving furniture..... having a laugh now.

We decided on two basic simple staircases in concrete eventually. I did all the steelwork myself. :cool:

MattF · Oct 20, 2018

s hearn said:
You wouldn't believe how hard it is to keep my hands in my pockets at...

Some blokes probably say the same at the sight of a fit bird too.

Mind you, they could be keeping their hands in their pockets for good reason.

Stuff you have made today

Member

Member

Member

Member

Member

Member

Member

Member

Member

Forum Supporter

Moderator

Member

Member

Member

Member

Member

Member

Forum Supporter

Forum Supporter

Forum Supporter