Stanners euro mig 2000

[john westbrook]

Hello just been offered a stanners euro mig 2000 cheaply
Are they any good
Has anyone got or uses one
And whats the spot weld function like
Do they run off a household plug 240 volts
Thanks

 

[Wozzaaah]

Easy enough to find all that via a quick Google search.
30-160A output, single phase 240 or 415v input, will probably run from a 13A plug but not at full output.
The spot weld funtion is simply a timer. Set the dial to the required on time, press the trigger, the power will shut off once the time has elapsed, no more elaborate than that.
How cheap is cheap?

 

[john westbrook]

Easy enough to find all that via a quick Google search.
30-160A output, single phase 240 or 415v input, will probably run from a 13A plug but not at full output.
The spot weld funtion is simply a timer. Set the dial to the required on time, press the trigger, the power will shut off once the time has elapsed, no more elaborate than that.
How cheap is cheap?

£50

 

[Wozzaaah]

£50

Definitely worth a punt at that price. No return lead by the look of it but they're not expensive. Any torch with it?

 

[eddie49]

Hello new here, i want to buy a mig

I want to buy a mig, my budget is around £180-200. i.m restoring an old mini so will be doing floor pans panels etc. Whats a decent one to go for in this price range, i.m working outside as well. I previously had a 130 gaslees one which kept on blowing holes in everything even on the lowest...

www.mig-welding.co.uk

Are you still looking, 3 1/2 years later?

 

[john westbrook]

Definitely worth a punt at that price. No return lead by the look of it but they're not expensive. Any torch with it?

Return lead?
Is that an earth lead
Yep got a euro torch with it

 

[john westbrook]

Hello new here, i want to buy a mig

I want to buy a mig, my budget is around £180-200. i.m restoring an old mini so will be doing floor pans panels etc. Whats a decent one to go for in this price range, i.m working outside as well. I previously had a 130 gaslees one which kept on blowing holes in everything even on the lowest...

www.mig-welding.co.uk

Are you still looking, 3 1/2 years later?

Lol no had loads since
Clark 151 en
Sealy 130 supermig
Currently using clark 135te
Now this Stanners has turned up

 

[eddie49]

Looks like you could get a bargain, and a decent semi-professional machine. This ( rather smarter-looking ) one went for £180:

Stanners Euromig 2000 - Grievesons Auctioneers

Stanners Euromig 2000

grievesons.co.uk

The data plate on this one confirms what Woz said - it is a single-phase machine that can run off 230v on a 13A plug, but also on 415v across two phases of a "red plug";

STANNERS Euromig 2000 Mig Welder; Serial Number: E95/L/0197; Complete with Mig Torch and Earthing Clamp

STANNERS Euromig 2000 Mig Welder; Serial Number: E95/L/0197; Complete with Mig Torch and Earthing Clamp

onlinesales.walkersingleton.co.uk

With 8 voltage steps across a 160 Amp output, it should give good control on thin sheet metal.

Return lead?
Is that an earth lead

No, the return lead is the return lead. It is not the earth lead, even if many people call it by that name....

 

[john westbrook]

Looks like you could get a bargain, and a decent semi-professional machine. This ( rather smarter-looking ) one went for £180:

Stanners Euromig 2000 - Grievesons Auctioneers

Stanners Euromig 2000

grievesons.co.uk

The data plate on this one confirms what Woz said - it is a single-phase machine that can run off 230v on a 13A plug, but also on 415v across two phases of a "red plug";

STANNERS Euromig 2000 Mig Welder; Serial Number: E95/L/0197; Complete with Mig Torch and Earthing Clamp

STANNERS Euromig 2000 Mig Welder; Serial Number: E95/L/0197; Complete with Mig Torch and Earthing Clamp

onlinesales.walkersingleton.co.uk

With 8 voltage steps across a 160 Amp output, it should give good control on thin sheet metal.

No, the return lead is the return lead. It is not the earth lead, even if many people call it by that name....

Sny idea of the weight mate
I havent picked it up yet
Its a large machine

 

[john westbrook]

Looks like you could get a bargain, and a decent semi-professional machine. This ( rather smarter-looking ) one went for £180:

Stanners Euromig 2000 - Grievesons Auctioneers

Stanners Euromig 2000

grievesons.co.uk

The data plate on this one confirms what Woz said - it is a single-phase machine that can run off 230v on a 13A plug, but also on 415v across two phases of a "red plug";

STANNERS Euromig 2000 Mig Welder; Serial Number: E95/L/0197; Complete with Mig Torch and Earthing Clamp

STANNERS Euromig 2000 Mig Welder; Serial Number: E95/L/0197; Complete with Mig Torch and Earthing Clamp

onlinesales.walkersingleton.co.uk

With 8 voltage steps across a 160 Amp output, it should give good control on thin sheet metal.

No, the return lead is the return lead. It is not the earth lead, even if many people call it by that name....

Sny idea of the weight mate
I havent picked it up yet
Its a large

 

[eddie49]

Transformer-based MIGs in this class typically weigh 50 to 80kg.