Stainless exhaust pipe bending

[Anguz]

Dairy bends is another search term….they are not cheap but make nice bike exhausts

they tend to be 316 in my experience... didnt stop me making the kit car exhaust from it mind... hasnt cracked yet, 10 years on

 

[Dutch Welder]

There are companies selling pre bent pipework.
If you check out racing parts suppliers like Fineline , Biesheuvel or Autosportcompany they sell bends, pipe and the rest.
www.biesheuvel.nl
www.autosportcompany.nl

Powersprint Construct (Bouw je eigen uitlaat)

U kunt met de onderdelen die u hier vindt zelf een complete uitlaat samenstellen. Tevens kunt u de onderdelen gebruiken voor het repareren van een defecte uitlaat. Alle onderdelen om een uitlaat te bouwen zijn te verkrijgen, gemiddelde levertijd is 3-7 werkdagen. De Genoemde Diameters zijn...

www.fineline-imports.nl

Fineline would be my choice.

 

[sako243]

perhaps check out the cost of a new exhaust build in the UK...
I used to have clients from Holland and Germany come to the UK for engine replacement etc.....
worth a look plus a weekend away......

Based on my recent experience with ProFab in Swansea I'd suggest this too. Dropped off 6x6 in the morning, it was on the ramp about 10.30ish. Came back at 4.30 and he was just checking for leaks. Fully custom exhaust (albeit I already had tubular downpipes) with a custom built silencer on the day for £640 including the VAT. Fantastic service from James and it certainly quietened down the deafening roar of the V8.

 

[Nederlands]

There are companies selling pre bent pipework.
If you check out racing parts suppliers like Fineline , Biesheuvel or Autosportcompany they sell bends, pipe and the rest.
www.biesheuvel.nl
www.autosportcompany.nl

Powersprint Construct (Bouw je eigen uitlaat)

U kunt met de onderdelen die u hier vindt zelf een complete uitlaat samenstellen. Tevens kunt u de onderdelen gebruiken voor het repareren van een defecte uitlaat. Alle onderdelen om een uitlaat te bouwen zijn te verkrijgen, gemiddelde levertijd is 3-7 werkdagen. De Genoemde Diameters zijn...

www.fineline-imports.nl

Fineline would be my choice.

Thanx.
I'll try them

Based on my recent experience with ProFab in Swansea I'd suggest this too. Dropped off 6x6 in the morning, it was on the ramp about 10.30ish. Came back at 4.30 and he was just checking for leaks. Fully custom exhaust (albeit I already had tubular downpipes) with a custom built silencer on the day for £640 including the VAT. Fantastic service from James and it certainly quietened down the deafening roar of the V8.

that would be expensive to drive from holland
And i do know how to weld with tig.
Also like doing it (bought a new ac/dc 200amps recently)

 

[Nederlands]

made it happen.
Hope you like the pictures.

i did forgot to take a complete picture.

But it's already on

 

[Wildefalcon]

Nice work! I'd like to be able to TIG. Not got the time or the kit.

 

[Nederlands]

Thanx Wildefalcon (and all others)
Tig is nice to do
And clean without spatters

Although mig is much faster,
I choose Tig most of the time