source for 0.5 0.6 0.7 0.80.9 and 1mm drills

[ukracer]

I am trying to find a source for 0.5 0.6 0.7 0.80.9 and 1mm drills.

biggest problem I thought I would have is the 50mm length needed but I cant even find standard ones at tracy tools , cromwells or macclesfield tools etc.

 

[The_Yellow_Ardvark]

Try RS Components.
Just did a quick phone google and found this.

http://uk.rs-online.com/web/c/tools...bits/twist-drill-bits/?searchTerm=0.5mm+drill

http://uk.rs-online.com/web/p/drill-bit-sets/0457627/

I had used them when we had to re work old PCB.
Best of luck in your search.

 

[Spark plug]

Search micro drills and you'll find loads, but to get a 0.5mm drill with a 50mm cut length I would think your getting into specilist tertiary.

What's it for? For a 0.5mm drill I would imagine you'll need to run 20,000 rpm+.

 

[ukracer]

Search micro drills and you'll find loads, but to get a 0.5mm drill with a 50mm cut length I would think your getting into specilist tertiary.

What's it for? For a 0.5mm drill I would imagine you'll need to run 20,000 rpm+.

Its a mate of mine who makes pole floats..

 

[Robotstar5]

A good selection from Squires Tools but I think you will struggle with the length required.

 

[brightspark]

I am trying to find a source for 0.5 0.6 0.7 0.80.9 and 1mm drills.

biggest problem I thought I would have is the 50mm length needed but I cant even find standard ones at tracy tools , cromwells or macclesfield tools etc.

tracy tool;s do number drills no 1 to sixty. they should cover all metric sizes

 

[graffian]

Try drill service.

 

[zzr1200]

Cromwell tools.

From 0.25mm upwards, chose your size from the drop down box.



https://www.cromwell.co.uk/shop/cut...hss-jobber-drills-metric-steam-tempered/f/261

 

[ukracer]

Cromwell tools.

From 0.25mm upwards, chose your size from the drop down box.



https://www.cromwell.co.uk/shop/cut...hss-jobber-drills-metric-steam-tempered/f/261

Not long enough mate. The 1.0 mm is only 34mm long...

 

[WorkshopChris]

Have a look on http://www.mscdirect.co.uk/cgi/insrhm we use then for a lot of tooling.

 

[optima21]

they're available on ebay at 100mm long either £2 from the uk or £1 from the far east. look for "0.8mm extra long drill" etc

 

[ukracer]

they're available on ebay at 100mm long either £2 from the uk or £1 from the far east. look for "0.8mm extra long drill" etc

Yeah apparently he has tried these and they are great for drilling bananas.