Some help and advise please

  1. ryan middleton

    ryan middleton New Member

    Messages:
    13
    Location:
    Scotland
    Hi I’m new to welding did a little back in college but very basic and looking for some info on setting my new welder up got a reboot RBM-1600 3 in 1 but the manual is very basic can someone tell me what this chances in the picture I get a opinion of + - 0 to 15.is this for fine tuning wire speed? upload_2020-5-11_18-9-36.jpeg
     
    • upload_2020-5-11_18-2-40.png
  2. mike 109444

    mike 109444 Member

    Messages:
    4,254
    uk Bristol
    Think you will find that's "variable inductance"
    And welcome BTW :hug:
     
    ryan middleton likes this.
  3. mike 109444

    mike 109444 Member

    Messages:
    4,254
    uk Bristol
    This is taken from another machines manual
     
    • inductance.jpg
  4. ryan middleton

    ryan middleton New Member

    Messages:
    13
    Location:
    Scotland
    Ok perfect thanks for that will leave it at 0 for the time being. I’m sure I will have plenty more questions when I get more into haha thanks for the reply
     
    slim_boy_fat likes this.
  5. mike 109444

    mike 109444 Member

    Messages:
    4,254
    uk Bristol
    :thumbup:
     
  6. slim_boy_fat

    slim_boy_fat Forum Supporter

    Welcome aboard, Ryan :waving: We're getting quite a few from God's own country joining up. :thumbup:
     
    ryan middleton likes this.
  7. frank horton

    frank horton V twins are great but 4"s rule.........

    Messages:
    1,839
    Location:
    Soon 2 B Crete
    thought that was Yorkshire........hahaha.......
     
  8. slim_boy_fat

    slim_boy_fat Forum Supporter

    Fake news.....:whistle: :D
     
    Wany likes this.
  9. ryan middleton

    ryan middleton New Member

    Messages:
    13
    Location:
    Scotland
    Do any of you guys have a easy to follow spreadsheet for setting up a welder for what thickness of metal you are doing I’ve seen some on google images that come inside some units but are difficult to work out and are normally for Americans with the metal size mm would be easier if you get them haha I’ve had a look on the forum but not had much luck If someone could point me in the right direction
     
  10. ryan middleton

    ryan middleton New Member

    Messages:
    13
    Location:
    Scotland
     
Advertisements