Socket clips and spanner dividers

[Seano]

Just bought myself a new tool chest and am looking for some socket clips and spanner dividers, most of the ones I've seen are either fro China or the US, anyone got any suggestions (not keen on the steel rails that you end up riveting into the box)

 

[wristpin]

Know what you mean about not wanting to drill and rivet to the box. I cut a sheet of thin alloy to fit the floor of the drawers with a turn up at opposite ends, rivet the rails to that. The turn ups give something to get hold of to lift the loaded rails out when having a clean up and sort out. Works for me.

 

[armalites]

You don't need to rivet the rails to the box, I don't and I like the fact I can pick up a rail of one particular type of socket and have it next to the job. I use Ernst spanner racks, they are available in different sizes and they also do reversed one so you can sit them next to each other

 

[atomant48]

I’ve got several of the twist lock socket racks (couple SO and a couple identical without the SO branding). In fact I’ve got one spare sitting in it’s box ....

Love them. Carry them when needed out the box.

I’m oretty sure this was a thread recently as I remember someone wanted some foam liners I had spare too.

 

[Robotstar5]

I use these for my spanners.

 

[keithski122]

Ernst stuff is good.

 

[frank horton]

When u have a least 1/2dozen spanner’s of the same size plus all the range of sizes BUT diff lengths and thicknesses plus AF and Whit etc...these spanner racks just don’t work for me....
My sockets are on racks or in the inside of the original box trays placed inside the drawers of the roll away....
Nice to be neat but not when ur busy.....
Sorry about the mess but all my stuff is now in Crete waiting for daylight.....yep all packed on 2 x 40 ft artics....

 

[addjunkie]

I use these


Not so good if you want to lift the set out

 

[indy4x]

@addjunkie where did you get the spanner racks in the right hand draw?

I have some already, had them years and want some more

 

[knighty]

these for sockets https://www.ebay.co.uk/itm/132996198869

so much easier when the numbers are on the top :-)

 

[Seano]

I use these
View attachment 194875

Not so good if you want to lift the set out

Make, Name ????

 

[Seano]

Thanks chaps

 

[addjunkie]

Mine were from a random supplier on the bay of evil, search sharks teeth. Loads of options come up

 

[indy4x]

I did spend an evening searching ebay, loads of sharks teeth spanner racks but I specifically wanted the sort where the teeth were all equal, all the ones I found were like what's in your left hand compartment

 

[addjunkie]

I did spend an evening searching ebay, loads of sharks teeth spanner racks but I specifically wanted the sort where the teeth were all equal, all the ones I found were like what's in your left hand compartment

Right I get you, sealy do both types I think

 

[indy4x]

Had another look on the bay and couldn't find any Sealy ones but found these

https://www.ebay.co.uk/itm/600mm-Lo...d-ee9e-4823-93dc-5aeec50f00bf&epid=4017004740