First of all comments on (look at the two main runs, not the ones on the edges):
underneath:
So, having got that far I need to weld a patch in, but this is on an upright, instead of laying flat.
The main problem is not actually getting the weld on in the first place, secondary is Im blowing away the end of the panel.
Im doing something wrong, but I dunno what - any tips/advice to working in different planes ?
underneath:
So, having got that far I need to weld a patch in, but this is on an upright, instead of laying flat.
The main problem is not actually getting the weld on in the first place, secondary is Im blowing away the end of the panel.
Im doing something wrong, but I dunno what - any tips/advice to working in different planes ?