Bob Hitchin
New Member
- Messages
- 11
- Location
- Bath, UK
How do I check the relay?
you should hear it clicking when you pull the trigger if it is doing this then chances are the contacts are burnt inside you should be able to remove the cover if you go steady and maybe clean them just to try it but another relay is the way to go if this is the caseHow do I check the relay?
I've had the very same thing but with a crimp on the return lead although my wire feed worked as normalI've finally tracked the problem down, and as expected it was something very simple, a bad earth at the point where the black cable connects to the torch (point 'X' ) It was testing as ok as a circuit but when any load was put on it it failed.
Thanks again for all your help,
Bob