Sintered bronze

[stuvy]

Does anyone have a uk supplier of 4mm
sintered bronze

thanks in advance

 

[Agroshield]

When someone says sintered bronze to me, I think of Oilite material (i.e. oil impregnated). This is available in solid bar form. HPC bearings have it but the smallest size they list is 1/4". Check the manufacturer's site to see if available in smaller metric size.

 

[RWD3M]

Does anyone have a uk supplier of 4mm
sintered bronze

thanks in advance

When someone says sintered bronze to me, I think of Oilite material (i.e. oil impregnated). This is available in solid bar form. HPC bearings have it but the smallest size they list is 1/4". Check the manufacturer's site to see if available in smaller metric size.

You got a lathe @stuvy?

 

[stuvy]

When someone says sintered bronze to me, I think of Oilite material (i.e. oil impregnated). This is available in solid bar form. HPC bearings have it but the smallest size they list is 1/4". Check the manufacturer's site to see if available in smaller metric size.

thanks for the heads up but I’m specifically looking for sintered bronze

I can only find two people that sell it in the size we are after for work

 

[stuvy]

You got a lathe @stuvy?

yep but not looking for a bearing or a bush

I’m after a flat sheet in 4mm 180x160mm x2 off

 

[James1979]

Leeds brass

 

[RWD3M]

yep but not looking for a bearing or a bush

I’m after a flat sheet in 4mm 180x160mm x2 off

Oh crikey, that's a different matter.

Good luck chap.

 

[stuvy]

Thanks

@Agrismith just called them they don’t do sheet

thanks for the reply’s so far

I know two heads are always better than one Hence asking on here

 

[stuvy]

Leeds brass

I just googled but the closest I can find is asc metals

 

[RWD3M]

yep but not looking for a bearing or a bush

I’m after a flat sheet in 4mm 180x160mm x2 off

These boys perhaps?

Sintered Plates | Sintered Bearings | Oilite Sintered Plates | Bowman

www.bowman.co.uk

 

[stuvy]

These boys perhaps?

Sintered Plates | Sintered Bearings | Oilite Sintered Plates | Bowman

www.bowman.co.uk

They have given me a quote but typically it’s too small for what we want!!

our current supplier has a shipping time of 22weeks…

 

[James1979]

Sorry. My bad! Rain on phone.

Leeds Bronze Engineering Ltd

Leeds Bronze Engineering was formed in 1974 as a specialist producer of bronze bearings & bushes. Over the years we have continued to grow, & are now the UK's largest manufacturer of bronze bearings & bushes.

www.leedsbronze.co.uk

 

[stuvy]

Sorry. My bad! Rain on phone.

Leeds Bronze Engineering Ltd

Leeds Bronze Engineering was formed in 1974 as a specialist producer of bronze bearings & bushes. Over the years we have continued to grow, & are now the UK's largest manufacturer of bronze bearings & bushes.

www.leedsbronze.co.uk

sadly they don’t stock sheet

he did recommend a company in Bedford, turns out they are a few minutes from where I’m sitting!! Hopefully they call back with an answer

 

[stuvy]

Bowman have 5x8” sheet

did you ever use anything else @bR39Da or just noticed bother in the end?

 

[stuvy]

Three layers of stainless mesh.

does it flow the same?

 

[stuvy]

The shorter sintered piece will work with a small baffle and part redesign
Iv spent almost all day emailing or calling people to chase it up

 

[Agroshield]

I've search and searched over the years to find decent suppliers. It's great for making purge diffusers for purge boxes etc. Always gave up.

For that application, have a look for 'sintered bronze filter'. Used a lot on pneumatic gear as a silencer.

e.g.

https://www.airsupplies.co.uk/sintered-bronze-silencer (note NPT thread)

Sintered Bronze Filter Cartridges Manufacturer Sintered Metal Filter Cartridge Supplier, Exporter in UK | TFI Filtration UK LTD

TFI Filtration is a highly efficient Sintered Bronze Filter Cartridges and Sintered Metal Filter Cartridge Manufacturer, Supplier and Exporter in UK

tfifilter.uk

Porous Sintered Metals