Shrink wrap

[Welderpaul]

Need to shrink wrap a couple of pallets.
Got propper shrink wrap plastic courtesy of the powdercoaters (That stuff is expensive!)
Don't have the propper propane gun with flat blade nozzle...what else will work. Plumbers type propane torch just melts holes because the flame pattern is not wide enough..what else will work.. dare i use oxyacetylene?

 

[madkayaker]

paint gun or ask you lass nicely to borrow hair dryer....

 

[Paul.]

Electric hot air gun with a fantail nozzle

 

[Hitch]

Elec heat gun?

 

[Welderpaul]

This sort of thing?

http://cgi.ebay.co.uk/Bosch-PHG500-...286.c0.m14&_trkparms=66:4|65:10|39:1|240:1318

 

[Hitch]

I would have thought so, but never tried it, thats what i use for heatshrink sleeving etc.

 

[Paul.]

yep, or this,
they do have a light duty cycle though

 

[Hitch]

Heres a thought, Have you got a space heater Paul?

 

[Welderpaul]

Heres a thought, Have you got a space heater Paul?

Got red rads...

 

[madkayaker]

Borrow georgeb's welder that should get hot enough after a couple of rods

 

[Paul.]

This'll do it,
What they use for torch on roofing.

 

[Hitch]

Borrow georgeb's welder that should get hot enough after a couple of rods

Or maybe one of these beauties?

Ill stop now

 

[madkayaker]

and the difference is that picture is after it was wired in to the cooker socket

 

[Welderpaul]

Mines bigger

 

[madkayaker]

yours was on a D type

 

[Welderpaul]

yours was on a D type

With 1.0mm T&E

 

[madkayaker]

running the new hoist

 

[Wozzaaah]

Here ya go Paul, job sorted

 

[Welderpaul]

Here ya go Paul, job sorted

Come on round Woz - we've all the beans you can eat!

 

[Wozzaaah]

Hehe, light the touch-paper and stand well back