I've stripped all the Celly paint, rattle can primer and been preparing all my panels off the bike. I've only got so much space and was thinking of keeping dust down before I paint so was thinking of roller'ing 2k HB primer on.
I've sanded down at 180 grit dry.
Best roller? Small Cheep foam one? Guessing using 2k I'll go through a few.
Do you use more or less thinners when using a roller?
How many coats, do you wait for flash off time or longer before another coat and how long then till I can flatten off?
Can I use a brush for awkward places as they are bike panels and tank.
Should I use and Rocket accelerator, I'll be trying to get the temp up with a few Halogen heaters, I do have the option of maybe taking it in the house if it don't smell.
Cheers
I've sanded down at 180 grit dry.
Best roller? Small Cheep foam one? Guessing using 2k I'll go through a few.
Do you use more or less thinners when using a roller?
How many coats, do you wait for flash off time or longer before another coat and how long then till I can flatten off?
Can I use a brush for awkward places as they are bike panels and tank.
Should I use and Rocket accelerator, I'll be trying to get the temp up with a few Halogen heaters, I do have the option of maybe taking it in the house if it don't smell.
Cheers