Ride on mower, safety switch plug identification help

[dan.taylor.1]

Hi folks,

I'm after help identifying the connector type used on a lot of the safety switches fit to ride on mowers, they're usually the same generic little 4 pin switch, usually only 2 wires used, plug is 2 x 2 pins stacked horizontally like the attached pic.

I've hunted on Google but no joy getting a solid answer. I'm asking as I've had a couple where the plug was damaged, or a wire has pulled out etc and rather than swapping the whole (usually expensive) loom, knowing the connector type and having a spare to just swap wires over to would be a real time saver.

As always, any help much appreciated!

Cheers, Dan

 

[Smouser]

I used an image search on Aliexpress hoping for it to deliver the results. It did not

Is there any useful info you can get from this listing?

725-04363 Plunger Safety Interlock Switch Replacement for MTD 725-04363 725-04363 Cub Cadet 72504363 - AliExpress 34

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

Maybe try Aliexpress image search with a photo of the actual plug you need?

*Edit*
These connectors look like they MIGHT work?

2.8mm 1P 2P 3P 4P 6P 9P Automotive Quick connection Electrical Wire Connector Male Female Cable Terminal Plug Kits Motorcycle - AliExpress 13

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

ChatGPT reckons

"The connector that fits into the 725-04363 Plunger Safety Interlock Switch is typically a 4-pin flat blade connector or a 4-pin female spade terminal connector.

For a proper replacement, you should look for:

• 4-position female connector housing (compatible with Cub Cadet/MTD safety switches).
• .250-inch (6.3mm) spade terminals inside the connector.
• Locking tab design to secure it to the switch.

This type of connector is commonly found in lawn tractors, mowers, and outdoor power equipment for safety interlock functions, such as seat, brake, or PTO safety switches. You may find it under names like MTD safety switch connector or Cub Cadet interlock switch harness connector."

Maybe this?

5sets 6.3mm automobile wire connector male and female cable terminal plug kit motorcycle harness connector car 1/2/3/4/6/8/9pin - AliExpress 13

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

NIGHTMARE trying to find the correct connector

 

[Dave-sparks]

I'd just use generic insulated 6.3mm spade crimps

 

[dan.taylor.1]

I'd just use generic insulated 6.3mm spade crimps

On my machine I would, but on a customer's machine it has to be right really.

 

[m_c]

Possibly this - https://www.auto-click.co.uk/Automotive-Connectors/4-way/180900?limit=100

However, if you take a couple good photos of the connector, one face on, and one showing the overall shape with any latches, and email Auto Click them along with the main dimensions, they're usually good at identifying the connector.