Replacement drive rollers

[azburl]

Hi,
I hope you can excuse my very crude drawing! but i am having trouble finding replacement rollers for my welder, it has had a replacement wire feed unit so i cannot ask the manufacturer. The ones i look at online either are square drive or a keyway, i am after a 0.8mm drive.

Thanks in advance if anyone can help!

Aron

 

[Radar 3]

I have a roller that is the same size apart from the internal Brass Bushing. Will the Bushing come out so you could fit it in this roller

 

[azburl]

I have a roller that is the same size apart from the internal Brass Bushing. Will the Bushing come out so you could fit it in this roller

yes i should be able to press these in and out no problem! i am after a pair with 0.8mm on as this is 1.0/1.2

 

[Radar 3]

I only have one roller 0.8/1.00 it is Murex part number 1413459.

 

[azburl]

I only have one roller 0.8/1.00 it is Murex part number 1413459.

ordered! thanks

 

[gordon stephenson]

I found a firm selling rollers, EWM and several other makes too, they were a fraction of the price, Place is called Metal Fabrication supplies,

 

[Radar 3]

I found a site called www.THEXMOD.com no doubt members have heard of it ex MOD spares, but the Murex WFU feed roller was selling for around £5.00. Wow!

 

[azburl]

I found a site called www.THEXMOD.com no doubt members have heard of it ex MOD spares, but the Murex WFU feed roller was selling for around £5.00. Wow!

yep thats exactly where i ordered from, got the pair for a tenner! the postage wasnt cheap though! but even with £7 postage it was still the cheapest place and was next day delivery!

 

[Radar 3]

yep thats exactly where i ordered from, got the pair for a tenner! the postage wasnt cheap though! but even with £7 postage it was still the cheapest place and was next day delivery!

Hope they work for you. The bushing should push out. You saved a few quid there,glad to be of help.