Regulator Fitment with Adamsgas Bottles??! Help

[Davosss]

Hi there,

I recently picked up a Sealey Supermig 195 secondhand, and have ordered a 9.8 litre bottle of Argon/co2 mix from Adams gas. After seeing a picture of the bottle, im wondering whether the regulator on my welder will fit the bottle. I think the regulator is female, it has the large brass nut which I assume pulls the bottle adapter tight. I was just wondering if anyone could tell me if the stock 'industrial' regulator will fit that bottle.

Thanks

Dave

 

[GrahamGKD]

Dave,
I have a couple of bottles from Adams and have had no problems connecting to them with the standard regulators which were supplied with my welders (Lorch and Portamig).

Graham.

 

[paultheg33k]

Hi there,

I recently picked up a Sealey Supermig 195 secondhand, and have ordered a 9.8 litre bottle of Argon/co2 mix from Adams gas. After seeing a picture of the bottle, im wondering whether the regulator on my welder will fit the bottle. I think the regulator is female, it has the large brass nut which I assume pulls the bottle adapter tight. I was just wondering if anyone could tell me if the stock 'industrial' regulator will fit that bottle.

Thanks

Dave

Was the reg used on pub CO2 before? I'm fairly sure my pub cylinder has a male connection with the regulator having a female nut.

The Argon reg which came with my ebay arc-tec has a propane POL-type connector on it, male...

PC