Here's some recent welding I did, after wiring up my SIP buzz box arc welder to the cooker point in my kitchen (30 amps). At last, I can run the buzz box on full (about 130A output I think) without it blowing a 13A fuse.
I tacked the 12mm rebar together and then ran some 'beads' on 130A with Aldi 3.2mm rods. There's negligible spatter and I can't fault either the buzz box or the rods. Most importantly, the joints seem incredibly strong.
I tacked the 12mm rebar together and then ran some 'beads' on 130A with Aldi 3.2mm rods. There's negligible spatter and I can't fault either the buzz box or the rods. Most importantly, the joints seem incredibly strong.