123hotchef
Member
- Messages
- 14,346
- Location
- Kent
I am after some 8mm or 10mm re bar for my BBQ grill does any one have any they want to get rid of.
Or shall I pop down to travis
Or shall I pop down to travis
- Thread starter 123hotchef
- Start date
Screwdriver
Member
- Messages
- 10,742
I have a ton of it. Even if I was to give it away, it would work out more expensive than just buying some new.
On the other hand, if you were to pop over to W. London, you could have some (f)rebar with your cuppatea after the shed tour.
Naturally this is part of my upselling strategy. No one leaves here empty handed...
On the other hand, if you were to pop over to W. London, you could have some (f)rebar with your cuppatea after the shed tour.
Naturally this is part of my upselling strategy. No one leaves here empty handed...
123hotchef
Member
- Messages
- 14,346
- Location
- Kent
Thanks for the offer. Where abouts in West London are you Mr S? you never know I might be over that way some time soon. A 3m length is under a tenner and 2 lengths will probably do
Parm
Respect The Sound System
- Messages
- 18,010
- Location
- Towcester
@123hotchef
6mm rebar will be good enough, the thicker stuff takes too long to get hot and sucks out too much heat from the BBQ
I’ve got a grill made of 6mm that’s been sat out side for 6 years. It’s in tip top condition
6mm rebar will be good enough, the thicker stuff takes too long to get hot and sucks out too much heat from the BBQ
I’ve got a grill made of 6mm that’s been sat out side for 6 years. It’s in tip top condition
123hotchef
Member
- Messages
- 14,346
- Location
- Kent
I didnt see 6mm listed at travis Parm where did you obtain yours from
123hotchef
Member
- Messages
- 14,346
- Location
- Kent
failing that I cut up a cage I have here and harvest that for bits! some of it is galv but it will soon burn off!
Cobbler
Codger bodger
- Messages
- 8,035
- Location
- Gloucestershire UK
Added flavour
Parm
Respect The Sound System
- Messages
- 18,010
- Location
- Towcester
Few years ago I got some 1m long off cuts from a complete any called stressline, they make concrete lintels
Should be able to get it somewhere ???
Screwdriver
Member
- Messages
- 10,742
I have a fair pile of pre cut lengths of the stuff. I guess postage wouldn't be that expensive if I sent you some short lengths. Save messing about with cutting and collecting. Shall I look into that. This is the pile I'm thinking...
I think that's a fairly early picture. Pretty sure that's not even half the "shorts"....
I think that's a fairly early picture. Pretty sure that's not even half the "shorts"....
123hotchef
Member
- Messages
- 14,346
- Location
- Kent
I have a fair pile of pre cut lengths of the stuff. I guess postage wouldn't be that expensive if I sent you some short lengths. Save messing about with cutting and collecting. Shall I look into that. This is the pile I'm thinking...
I think that's a fairly early picture. Pretty sure that's not even half the "shorts"....
Dam thanks man, I ordered some stainless rebar already at £2 a meter why not cheaper than travis
