Ransomes MG5 Crawler

[slim_boy_fat]

What have you got?

Envy?

 

[Dieselman 63]

Mildly productive day despite heavy rain. The rain meant I couldn’t take the blue tractor out, the garden is just too wet. I did however buy bolts and used some old timber I found stored in the garden to make a sled for moving hedge cuttings. I was pleased with my design so I decided to take it for a spin, which went well. The orange tractor struggled with this load, it’s really just meant for lawn mowing tbh. When the garden dries up a bit I can start moving bigger loads.

 

[Agroshield]

Eat more pies. More weight over the back axle equals more traction. Would the sled benefit from chamfered ends?

 

[Dieselman 63]

Eat more pies. More weight over the back axle equals more traction. Would the sled benefit from chamfered ends?

Nah that tractor needs more hp. The blue one lays it’s own roadway, built to pull a plough. The sled has sheet metal from roof capping to aid it from digging in. When the garden dries out, I’ll give it another go.

 

[Robotstar5]

This may be of interest, I saw it at the 2018 Stoke Prior show

 

[Dieselman 63]

This may be of interest, I saw it at the 2018 Stoke Prior show

View attachment 300934

Its an MG6 - different carb arrangement gives it away. In worn and working guise, lovely, thanks for sharing

 

[Dieselman 63]

More fun with the crawler. The trailer is a pain, this is much easier. Wood is kind of on the way out but there’s still some solid stuff there in the big beams, good enough for this one job anyhow. The sled moves huge amounts of material quickly. This will allow it to be mulched (there’s an entire 60m shelter belt worth to do). Ideal work for the tractor really.

 

[Dieselman 63]

I’m not sure if people are bored of tractor pics so I’ll keep posting I suppose, at least whist it’s still working for me. I’ve had it pulling its sled about, moving absolute heaps of branches. Whilst it may not be so so impressive, it allows me to work alone instead of having two people when using the little trailer. The latter has such small capacity that the orange tractor was doing runs almost constantly whilst someone loaded. Knackered me and my dad, this is much easier!

I delivered six 100x100x2400 posts for a new compost bin project by sled, so easy with the machine. Then a quick tidy up with any random bits of branch in the trailer followed by the crap in front of the mulch store that’s been bugging me for months - finally tidy!

 

[Dieselman 63]

In technical/mechanical news, my friend is going to make me a battery box for the small 12v motorbike battery I bought today ($70). I’ll buy a switch and make a little plate for it to control the light by toggle. Something simple to control the headlight and any other lights I might add.

PTO shaft news - two bearings pulled out, RL 10 and 11… hmm they sound like they might cost a fortune. Three oil seals, two of which I managed to buy. It’ll be good to have the bearings oiled (they take the same ep140 that the drives do according to the book). The guy at the motorbike shop said most likely it had been run dry and water got into the box, allowing it to get to this stage. Soon it’ll look shiny and new, and hopefully last another seventy years. Bearings were GB SKF, rather old!

 

[Seadog]

hmm they sound like they might cost a fortune

If you want SKF you'll get change out of £200

 

[Dieselman 63]

If you want SKF you'll get change out of £200

F it let’s go full Gamet eh?

 

[Dieselman 63]

Nice to see it back running. Did you join the fb group? I apparently have been getting notifications a lot from the group.

I’m finally in!!

 

[Dieselman 63]

I’ve been having fun using the crawler but I really need to get onto those modifications to the cab area.

First up, a cardboard template for a ‘dashboard’. This will have the light switch on it, and anything else that I fit along the way. An electric mag kill switch for emergencies is something I’ve thought of fitting.

Second project is the clutch brake. This handle is much sturdier, and I have the bracket now! I just need to fit it all together, and buy the hardware for it.

 

[Seadog]

That looks very much like a star wheel dresser to me

 

[Dieselman 63]

That looks very much like a star wheel dresser to me

Shush!

 

[Dieselman 63]

All we need is a linkage and some paint

 

[angellonewolf]

All we need is a linkage and some paint

View attachment 301472 View attachment 301473

pack it with washers to keep it central

 

[Dieselman 63]

pack it with washers to keep it central

That would look awful. I’ll cut off some pieces of tube, might even have some brass tube in my box of special bits

 

[Dieselman 63]

Template put into steel. Drilled, and test fitted. The cutout for the clutch brake needs opening up a bit more. I put in a few more holes for possible future switches.

 

[angellonewolf]

That would look awful. I’ll cut off some pieces of tube, might even have some brass tube in my box of special bits

yea agree but pack it with washers then you can get the right spacing if you can then make a tube eather side would look better