Pferd Files

[Brad93]

Unfortunately haven’t been able to order the files as I’ve not had enough interest.

Have got some brushes though. Unfortunately some turned up in brass so need to be sent back.

The fillet weld brush is steel and really decent. £4.00 each

The long handled steel brush is awesome. You can really get some power behind it. £3.00 each.

Send me a PM if you’re interested.

 

[Seano]

Hi Brad, also came across these being demoed on weld.com, it's a range of edge chamfering burrs / Mills for doing 30° edges for v groove welds, the great thing is they can be used in any 1/4" mandrel and have a guide bearing fitted to them ideal for pipe work if you don't have a dedicated edge chamfer machine.

 

[Brad93]

Yes I’ve seen them. Very good but quite expensive. Ideal for a small amount of chamfering but quite time consuming if you’ve got a lot of bevelling to do.

I use the Pferd burrs and they are fantastic.

 

[gaz1]

brad no offense here but ive read all this thread

i know nothing of the files or there capabilitys or if they are any good or have years of usage per file

care to enlighten with a review of them and your thoughts?

 

[Arclikeharrypotter]

I've used pferd burrs and they seem to do a nice job. Put me in line for the brushes please brad.

 

[zeppelin builder]

Hi Brad, also came across these being demoed on weld.com, it's a range of edge chamfering burrs / Mills for doing 30° edges for v groove welds, the great thing is they can be used in any 1/4" mandrel and have a guide bearing fitted to them ideal for pipe work if you don't have a dedicated edge chamfer machine.

ive seen a guy using a die grinder through a hole in an old visor stops all the shards going every where

 

[Brad93]

Some pictures of the brushes

 

[Arclikeharrypotter]

2 of each if possible brad. They look real good

 

[Brad93]

2 of each if possible brad. They look real good

I’ve got two of each with me. I’ll weigh them tonight and get them boxed

 

[Brad93]

Brad, please add the tube brushes, fillet weld brushes and file cleaners to the order.
Cheers
Matt
( ps. Let me know what I owe you . Cheers )

Hi Matt,

Was you still intrested in some brushes? I have the fillet weld brushes to go at the minute and some long handled ones.

Waiting to get the tube brushes returned and exchanged because they sent brass.

File cleaning brushes havent turned up.

 

[Mattuk]

Hi Brad,
I have put a note on the brush thread saying I would like a three of each, plus a couple of brass ones.
How many short were we on the file order ?

Cheers
Matt