Allkarma247
New Member
- Messages
- 13
- Location
- London
I have a 1995 Toyota mr2 mk2 in need of a stretch of 10 inches to accommodate a kit car shell which i would like to place on top.
I have seen this done before a while back when kit car was more poplar, what was used was two pieces of 2"x4" tube steel 3mm thick and welded it inside each rocker panel allowing about 5" extra on each side of each brace to extend up into the rock-panel cavity
or maybe using another floor pan and cutting the 10 inches out and welding them together
here are some pictures of the job being done before on someone else kit car build
I have seen this done before a while back when kit car was more poplar, what was used was two pieces of 2"x4" tube steel 3mm thick and welded it inside each rocker panel allowing about 5" extra on each side of each brace to extend up into the rock-panel cavity
or maybe using another floor pan and cutting the 10 inches out and welding them together
here are some pictures of the job being done before on someone else kit car build
Last edited: