Large bottle on my Clarke pro 90

[mahesket]

In the process of getting everything set up to convert my Clarke pro90 to big bottles.

Just had these dropped off for the grand sum of £21

What else do I need?

Hose and fittings but what size from the flow meter?

Anything else?

Cheers
Matt

Edit speeling

 

[mike 109444]

In the process of getting everything set up to convert my Clarke pro90 to big bottles.

Just had these dropped off for the grand sum of £21

What else do I need?

Hose and fittings but what size from the flow meter?

Anything else?

Cheers
Matt

Edit speeling

A little pic might help guess they are gas cylinders?

 

[mahesket]

Haha, that's weird thought I posted a pic, seems my photobucket account has gone down.

Basically gas bottle, reg with single gauge (bottle pressure) and inline flow meter will try and sort the photo out.

 

[mike 109444]

Is the bottle (minus pic) argon/CO2 mix or CO2? Ask cos the fittings on the reg will be different. The output of the reg will/should have a hose barb (steped push pipe on fitting) this you will need to match a length of hose to probley 6 to 8mm bore. I have had the same piece of clear braded hose on my reg to mig for the past 25 years!! and it's still good. The mig is a Clarke 120 from all thoses years ago. Any hoo if you get a length of the braded hose you will then need to connect to your 90 this will have a 4mm pipe? Might be worth taking a couple of inches of the braded and couple of inches of 4mm going along to a plumbers merchant or even a motor spares place and get a double ended barb to fit one on one end and other on other end if that makes sense. There will only be a small amount of pressure in the pipe as the reg drops the pressure and flow so no need for fancy fittings. cable ties should hold pipes onto barb, use that at work for 1.5 bar.

 

[mahesket]

Picture of the reg an flow filter (if it works lol)

Clarke has 4mm tube, the standard stuff.

 

[Dev]

Search the forum for hose adapter you'll find everything you need.