Kemppi Kempomig 4200

  1. Hossein Maleki Member

    Messages:
    24
    Location:
    Iran
    Hi
    I bought this machine last week from closed company sales, I have missed the board.
    Can someone help me for technical detail about this machine, I need the service manual and board name and code, and I need help where I can find that board.
    You can see missed board location in the last pics, upper right corner, straight forward.
    Thank you.
     
    • IMAG3647.jpg
    • IMAG3648.jpg
    • IMAG3697.jpg
    • IMAG3701.jpg
    • IMAG3702.jpg
    • IMAG3776.jpg
    • IMAG3776.jpg
  2. angellonewolf

    angellonewolf Member

    Messages:
    5,236
    Location:
    bristol england
    id be carefull spending money on a mechine that had a board removed if your lucky its just a board if your unlucky its a doner mechie as it had another fault and they removed to board to fix another mechine
     
    Hossein Maleki likes this.
  3. Hossein Maleki Member

    Messages:
    24
    Location:
    Iran
    Thank you for wise words, really I bought about 8machine and this one has this problem.
    It seems good machine, if board price will be reasonable I will hope to work on it. but before everthing I need technical data, can you lead me ?
    Maybe really it has big problems but I don't see many manipulating in that machine.
     
  4. Hossein Maleki Member

    Messages:
    24
    Location:
    Iran
    Any ideas about technical detail? where I can locate service manual?
     
  5. eddie49 Member

    Seems to be a rare machine. Most online resources that I have been able to find refer to the newer Kempomat 4200.
    The good Polish electronics website www.elektroda.pl had a similar request for Kempomig 4200 Pulse documentation, and again they were only able to find the Kempomat:
    https://www.elektroda.pl/rtvforum/topic3549187.html

    This British company appears know about that model:
    http://www.autotech-robotics.com/kemppi-4200-pulsed-mig-weldsets/

    This Finish website sold a nice one 2 years ago for 3300 Euros:
    https://kiertonet.fi/tyokalut-ja-ko.../kemppi-kempomig-4200-pulse-hitsauskone-10514

    A little closer to you, Sevan Welding and Cutting of Tehran had one:
    http://www.sevanwelding.com/fa/kempomig-4200

    The website www.manualzilla.com does have original user manuals for the Kempomat, but not the Kempomig:
    http://manualzilla.com/doc/6766093/kempomat-2500--3200--4200

    Same for the www.manualsdir.com site:
    http://www.manualsdir.com/models/kemppi/kempomat-4200.html

    The content there shows what is in a typical manual, but it's still not going to help you magic a missing board out of thin air!
     
    Hossein Maleki likes this.
  6. Hossein Maleki Member

    Messages:
    24
    Location:
    Iran
    It seems I have a real problem now.
     
  7. eddie49 Member

    I think the only solution would be to find another machine with a different fault, and build one good one out of two.

    The British company that I mentioned:
    http://www.autotech-robotics.com/kemppi-4200-pulsed-mig-weldsets/
    seem to know and sell and service these machines. They probably will not be willing to share technical information, but perhaps you could ask them if they have a spare board, or a cannibalised "spares" machine. Contact: info@autotech-robotics.com
     
    Hossein Maleki likes this.
  8. Hossein Maleki Member

    Messages:
    24
    Location:
    Iran
    thank you
     
  9. Dennis Aspö

    Dennis Aspö Member

    Messages:
    1,149
    Location:
    Finland
Advertisements