Sergei Slovenija
Member
- Messages
- 1,267
- Location
- Slovenija Ljubljana
I try to fish for pearls, but let's see what a pewter button is up close.
- Thread starter Sergei Slovenija
- Start date
Sergei Slovenija
Member
- Messages
- 1,267
- Location
- Slovenija Ljubljana
Итак, посмотрел сегодня на фрезерный станок, с мощностью. Электропривод стола работает без лишнего шума. Вертикальный и горизонтальный шпиндель - в порядке. Все передачи включаются без особого напряжения. Естественно износ на ласточкином хвосте есть по всем координатам, в средних рабочих зонах. Стол практически без повреждений фрезой и сколами. Стол может вращаться по горизонтали в пределах 40 градусов. Есть износ подающих винтов. Электронная линейка отображает координаты по осям X и Y, ось Z не работает. Древняя электроника.
Высота фрезерного станка 2,4 метра, длина стола без ручек 140 см, с маховиками почти 1,8 м, ширина 30 см.
The curvilinearity of the table movement along the X axis is approximately 0.12 mm along the indicator, the vertical deviation is also approximately 0.12 mm (indicator and spirit level).
This is all we were able to measure, getting approximate data to understand the overall wear. The spindle can do 2.800 rpm. Photos did not turn out, only 2 photos in good quality. Moving the vertical spindle horizontally - the steering wheel and tightening with a wedge from a separate lever. The seller and his shop of used machine tools are located on the top of a mountain, 460 meters above sea level, in a remote mountain village. We drove through a powerful water storm all the way, sometimes with a visibility of 50 meters. With a small discount for the lost one steering wheel, they ask for 3,300 euros + VAT for a milling machine. Weight 2.1 tons of iron and steel. I'm thinking about BIAX
Высота фрезерного станка 2,4 метра, длина стола без ручек 140 см, с маховиками почти 1,8 м, ширина 30 см.
The curvilinearity of the table movement along the X axis is approximately 0.12 mm along the indicator, the vertical deviation is also approximately 0.12 mm (indicator and spirit level).
This is all we were able to measure, getting approximate data to understand the overall wear. The spindle can do 2.800 rpm. Photos did not turn out, only 2 photos in good quality. Moving the vertical spindle horizontally - the steering wheel and tightening with a wedge from a separate lever. The seller and his shop of used machine tools are located on the top of a mountain, 460 meters above sea level, in a remote mountain village. We drove through a powerful water storm all the way, sometimes with a visibility of 50 meters. With a small discount for the lost one steering wheel, they ask for 3,300 euros + VAT for a milling machine. Weight 2.1 tons of iron and steel. I'm thinking about BIAX
