How to fit regulator

[Stewart]

Hi I won this regulator off ebay and im not sure how to fit it.

pics here
http://s118.photobucket.com/albums/o98/stewart29992000/

I want to fit this to my clarke 135te Mig as this regulator is for small bottles only. any help would be great.

Cheers

stew

 

[weldequip]

Picture on the left? That will go straight onto dispossable canisters.
weldequip

 

[Stewart]

Cheers weldquip. but how to a attatch the gas flexi hose with the oliver ? thats the bit im not sure about.

 

[weldequip]

It should just push straight into the regulator; small, white plastic pipe from the back of the machine??
weldequip

 

[Stewart]

how to I remove the old regulator then weldequip do i just cut it off or can i get the clip off ?

 

[weldequip]

Are we talking disposable canisters or refillable cylinders?
weldequip

 

[Stewart]

Sorry I should of said its a regulator for disposable canisters.

 

[weldequip]

OK. The small gas pipe pushes into an olive on the regulator. Pull back & hold the olive (towards the regulator body not away from the regulator body) & the pipe should just pull out. Don't just try & pull the pipe out without holding the olive or you will bugger it up!
weldequip

 

[Stewart]

Ok so I just pull towars the body and the pipe should fall out. Thanks for your help.

 

[Leanne1979]

Hi weldequip
Just a quick question, Do you sell those types of regulators? (the ones for disposable bottles with the flow gauge on)
Leanne xx

 

[weldequip]

Hi Leanne,
No. I sell the basic Clarke version without guages. To be honest, the disposables last next to know time anyway, so a flow guage isn't really essential.
weldequip

 

[Alex]

weldequip, I did the whole thing with the regulator for 10L. It blasts out, turned it down to around 3L and doing some good welds

 

[foy9999]

Hi I won this regulator off ebay and im not sure how to fit it.

pics here
http://s118.photobucket.com/albums/o98/stewart29992000/

I want to fit this to my clarke 135te Mig as this regulator is for small bottles only. any help would be great.

Cheers

stew

I know this is an old thread but I've just looked at your photobucket and how the f**k did you get that Nova in the van!!?

 

[Stewart]

lol took 8 lads to get it lifted in.

 

[KMpuggy]

I know this is an old thread but I've just looked at your photobucket and how the f**k did you get that Nova in the van!!?

Lols, i was thinking the same, had a giggle at that. theres me looking for a regulator and then realised this is an old thread.