Help with lincoln 191 required

[andymigman]

hi can one help I have a Lincoln 191c and it will no longer turn wire feed motor I replaced thr contactor relay box and still nothing I slso removed motor and tested it off the machine all I get is loud clicking with no wire feed movement when trigger is pressed any help is very much appreciated

 

[mike 109444]

Hello Andy. If the pcb in your machine looks like the one in this post http://www.mig-welding.co.uk/forum/threads/lincoln-350c-tripping-circuit-breaker.51203/
Then you might want to read through the post as you have a similar fault. I am not saying you have a faulty pcb but the post will give you thins to check and places to meter, I assume you have a meter and are comfortable using it? If you can confirm some of the readings from that post it would help.
And welcome BTW