Help with a di log rcd tester

[normspanners]

Cheers for that MK

could somebody let me know the correct method to use my rcd tester if possible please

Anybody ?

 

[Robotstar5]

MK gave all the tests in post 4, here's a couple of youtube links, here & here

 

[brightspark]

not the same model but tests will be the same

 

[normspanners]

MK gave all the tests in post 4, here's a couple of youtube links, here & here

Hi MK gave the spec 's not the method but thanks for the link

not the same model but tests will be the same

Thats brilliant I was not sure about the 1/2 -1- mine says fast but I take it is the same as 5
I worked out that the two led lights where to tell if the wiring was correct

 

[madkayaker]

I think your going to need professional help changeling your board and testing to the required standard (and let's not forget part p) there is lots more than just RCD times that needed to be checked before energising and before being used

 

[Robotstar5]

As MK says, there is a lot more to it than RCD testing, you will need a couple more testers and knowledge before attempting a CU change, it's worth contacting a local sparky for advice.

 

[normspanners]

Yeh thanks for that, I do realise, the complexity of it , the only tester I didnt have was an rcd. I re wired the house and fitted the original CU quite recently (about twenty years) ago!! ( seems recent to me)
And have done a lot of industrial threephase stuff in the past doing most of the instillation of a massive SWA cable granulation plant that I designed and built that used to turn out about 5-10 ton of clean copper a day. And i was working last year with a Sparky doing a refit on a factory fitting a new 3PH CU, power correction unit and new machine supplies 30mm 5core. I am not quite a total newbie,
what I am trying to do is get the gear ready to blitz the job and make it the best and as cost effective as possible.