Hey guys i Registerd on this forum for some help and i want to weld above my head the matrerial thickness is 0,7 centimeters wide it is 5 length 250 just normal steel and i need to weld above my head with it for skill 2 i have almost a year and a half welding experience on school i am a student 16 years old but back to welds the specs that i have on the machine are 18 Volts 143 Amps and i dont get the good weld with it it doesnt fall down or some but it isnt straight u know it has to be flat he height of the corner weld above my head does needs to be 0,6 Centimeters thick so plz help my examinator is an ass
and i need also to pile up welds for skill welding to i cant figure out that cause these ones need to be small i can make only very wide ones but the specs of that machine are 18 volts between 89 amps and 98 amps and the same matrerial as i need to use for welding above my head so if any of u Proffesional welders couldt help me with ur Experience i wouldt Really like that Also Thanks Cya U can also mail me at www.lentoy9@hotmail.com
and i need also to pile up welds for skill welding to i cant figure out that cause these ones need to be small i can make only very wide ones but the specs of that machine are 18 volts between 89 amps and 98 amps and the same matrerial as i need to use for welding above my head so if any of u Proffesional welders couldt help me with ur Experience i wouldt Really like that Also Thanks Cya U can also mail me at www.lentoy9@hotmail.com