Gas Burner

[Parm]

can anyone tell me where I can get a gas burner like the one in the picture

One in the picture is an original calor gas unit I bought about 20 years ago, just can find one like it or even similar, diamter of the ring section is 100mm

Ignore the frame as that's something my dad made for me.

Most critical aspect is the ring must be between 100 to 150 mm diameter.

Should have mentioned that I'm not fussed about any of the in built supports on the ring as I will be making my own stand

 

[Paul99]

Tar pot burners used for roofing - at least that's what the two identical ones we have were used for.

 

[normspanners]

I built a gas space heater using a 6" one, and used a gas bottle with fan in the end as the body, still got it somewhere ??

http://www.ebay.co.uk/itm/New-Large-Cast-Iron-Gas-LPG-Burner-Cooker-Gas-Boiling-Ring-Restaurant-Catering-/141635565523pt=LH_DefaultDomain_3&hash=item20fa2337d3

http://www.ebay.co.uk/itm/9KW-DOUBL...308?pt=LH_DefaultDomain_3&hash=item4aea08bdbc

 

[Parm]

Tar pot burners used for roofing - at least that's what the two identical ones we have were used for.

I've looked at these and just too big and powerfull for what I need.

 

[Parm]

I built a gas space heater using a 6" one, and used a gas bottle with fan in the end as the body, still got it somewhere ??

http://www.ebay.co.uk/itm/New-Large-Cast-Iron-Gas-LPG-Burner-Cooker-Gas-Boiling-Ring-Restaurant-Catering-/141635565523pt=LH_DefaultDomain_3&hash=item20fa2337d3

http://www.ebay.co.uk/itm/9KW-DOUBL...308?pt=LH_DefaultDomain_3&hash=item4aea08bdbc

Norm

I've got one exactly like this, it's good with a large pot with lots of food but not very controllable for low heat with a small pot, I'll post s pic of my one with heavy duty custom stand

 

[Maker]

Can you not make one? A ring of copper tube joined with a tee and with holes drilled in it?

Good news, you can't get splinters from copper. I'll get my coat.

 

[optima21]

http://www.gasproducts.co.uk/acatalog/Boiling_Rings_Bitumen_Burners.html

 

[normspanners]

I controlled mine using an adjustable pressure reg that limits the gas pressure which makes them a little more controllable

 

[normspanners]

http://www.gasproducts.co.uk/acatalog/Boiling_Rings_Bitumen_Burners.html

Those fokers seem quite dear !!
Mind you I've never forgave them for ruining the chippy either

 

[mac53]

Try BES in the LPG section might be the one your looking for found them very useful
Boiling ring single burner £28.00