Maddog
Member
- Messages
- 170
- Location
- Manchester
Hi guys,
I’m currently in the process of converting my track Fiesta 1.4 (2006) to bike carbs.
I’ve junked all the EFI and today removed the pump from the tank and I’m using an external motorbike pump to feed the carbs from the tank.
however today I spliced in the bike pump to the original pump wiring and it wouldn’t run.
when I checked there was only 11.2v at the plug.
Any ideas why this maybe?
I’ve checked for bad earths, changed the pump fuse but still low. The battery is charged and showing just under 13v.
The annoying thing is I get that it may be a wiring fault, however the old high pressure pump ran fine.
Thanks in advance
I’m currently in the process of converting my track Fiesta 1.4 (2006) to bike carbs.
I’ve junked all the EFI and today removed the pump from the tank and I’m using an external motorbike pump to feed the carbs from the tank.
however today I spliced in the bike pump to the original pump wiring and it wouldn’t run.
when I checked there was only 11.2v at the plug.
Any ideas why this maybe?
I’ve checked for bad earths, changed the pump fuse but still low. The battery is charged and showing just under 13v.
The annoying thing is I get that it may be a wiring fault, however the old high pressure pump ran fine.
Thanks in advance