EWM 230 tetrix CK Worldwide error messsage

[Nederlands]

If after welding the torch is still "cold"
There is no problem.

@Lorch T300 did you read the manual of the machine?

There is alot of settings you can change.

Also at my job the auto frequentie is used by alot of welders

 

[Lorch T300]

If after welding the torch is still "cold"
There is no problem.

@Lorch T300 did you read the manual of the machine?

There is alot of settings you can change.

Also at my job the auto frequentie is used by alot of welders

This machine should have come to me ready to use. It was spec'd with a CK torch; I didn't add it later. It has just returned from EWM UK headquarters, where it was purchased from. They used an EWM torch to test it instead of the CK torch I sent with it. I would have expected them to know much more about the machine than me, I have used the exact same torch on my Kemppi for over ten years without any trouble. Thanks for all your help.

 

[Nederlands]

Didn't know you got it with that ck torch.
Ewm should have tested it with that ck torch before sending it to you the first time.

Unfortunatly the dealer where we bought the ewm,
Is about the same.
That's why i know my way around this machine.

The question i had for them 3 month's ago,
They asked me 2weeks ago.


But the Machine is a great welder
And think that ck torch is great to.

 

[tom2207]

always good to hear of a problem sorted , at least now it will turn up as a search result on the web for any one else having issues.