Arc Tourist
Member
- Messages
- 5,049
- Location
- Wales
Awhile back I cleaned up a power hacksaw and replaced the damaged cord with an offcut from an extension cord I had. The 6 foot long offcut was from a "Yellow" cord that had 110 volt connectors.
My question is: " Should have I used a different colour cord ? ", because the motor is 240 volts.
Is there any regulation about this ? The gage of the wires are the same.
My question is: " Should have I used a different colour cord ? ", because the motor is 240 volts.
Is there any regulation about this ? The gage of the wires are the same.

its pretty obvious its 240v if it has a 13 amp plug on it