Drill chuck buying advice?

[fizzy]

I bought one of these - very nice quality.
Can be found a bit cheaper than RDG

KEYLESS DRILL CHUCK 5-20MM CAPACITY (NO ARBOUR) - RDG Tools

KEYLESS DRILL CHUCK 5-20MM CAPACTY IT TAKES A B22 ARBOUR. THIS IS A TOP QUALITY KEYLESS DRILL CHUCK !!<>!!THE DRILL CHUCK ARBOUR IS NOT INCLUDED IN THIS SALE!!<>!! “YOU WON’T BELIVE THE QUALITY OF THIS CHUCK”

www.rdgtools.co.uk

 

[James1979]

Yes sorry I was talking about Rohm and Albrecht type keyless chucks.

Ahh ok. I can’t afford them

 

[DAPPH]

The drill has a B16 taper, cheap B16 keyless chucks can be found on Amazon (for example) for about £10 and up.
I found the keyless much easier to use, downside; it is longer, reducing the drill depth capacity.
I extended my Nu-tool bench drill column to give better usable depth.

Thank you indeed Sir. Thank you very much .

 

[DAPPH]

Thank you indeed Sir. Thank you very much .

My pal Paul happened to find a perfect thick walled diameter tube match for his NU tool drill press that had a racked table adjuster in the scrap at his engineering work place just under six foot five long , his boss let him have it for a £10 donation to the Barnado's charity box in the company's reception area .
Paul fabricated a new heavy duty strong steel foot plate & I helped him chemical anchor bolt it to his mancupboard floor then lift the drill head & new stalk into the foot plate . Bit of an over kill I thought , till he told me of his idea of putting a crank/arm in the tube in the future and turning the press into a radial drill with a 500 mm clearance from the drill centre to the tube and making an adaptor plate for the table for an 8 inch drill vice .

 

[daxliniere]

I bought one of these - very nice quality.
Can be found a bit cheaper than RDG

KEYLESS DRILL CHUCK 5-20MM CAPACITY (NO ARBOUR) - RDG Tools

KEYLESS DRILL CHUCK 5-20MM CAPACTY IT TAKES A B22 ARBOUR. THIS IS A TOP QUALITY KEYLESS DRILL CHUCK !!<>!!THE DRILL CHUCK ARBOUR IS NOT INCLUDED IN THIS SALE!!<>!! “YOU WON’T BELIVE THE QUALITY OF THIS CHUCK”

www.rdgtools.co.uk

View attachment 360763

I have one like this made by "Futec" and it's junk. Concentricity is appalling and it mustn't tighten all 3 jaws evenly, because I regularly get strip-out on the shafts of drill bits.
RDG Tools says "you won't believe the quality", but then again, they're in the business of sales, so...

 

[Stupoty]

hold 1-13mm drill (0-16mm is a bonus).

All my chucks stop some ware around 2.5mm , I got a nice new old stock ity bitty chuck for all the smaller drills.



Stu