Gareth0123
You'll need 16 pigs to do the job in one sitting!
- Messages
- 1,559
- Location
- Norwich, Norfolk, UK
Draper 200amp MMA/Mig Spool gun welder
Anyone got one?
Anyone tried one?
It looks like I won't be upgrading my 7 year old R-Tech 250 mig for a newer one: I've decided to scale everything down, semi retire and more or less walk away from the fabrication work I currently do and sell all my tube bending and tube rolling gear with the exception of the ridgid hand held benders up 22 mm.
My R-Tech 250 mig has been a faithful servant so I'm going to keep it and I think Y'all know how well I've been getting on with the cheap as chips Chinese 200amp MMA ZX7-200 welder.
Anyway I saw one of these Draper 200amp spool welders advertise don T'interweb and thought that would be OK to have as a dedicated Mig brazing set-up for me, Currently I run mig braze wire through my R-Tech mig with a dedicated torch and liner, but I'm getting towards the end of my 12 kg brazing wire that cost almost as much as the mig welder did. For the future I would consider only buying the extremely dear 1kg reels. www.toolstop.co.uk/draper-00587-mma-to-mig-converter-200a-240v/?msclkid=63524a38f68e17c8e6ef2b5d402a8a51&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%20-%20Draper%20-%20Brand%20%2B%20Category&utm_term=4578160305759080&utm_content=Draper%20-%20Brand%20%2B%20Category
Anyone got one?
Anyone tried one?
It looks like I won't be upgrading my 7 year old R-Tech 250 mig for a newer one: I've decided to scale everything down, semi retire and more or less walk away from the fabrication work I currently do and sell all my tube bending and tube rolling gear with the exception of the ridgid hand held benders up 22 mm.
My R-Tech 250 mig has been a faithful servant so I'm going to keep it and I think Y'all know how well I've been getting on with the cheap as chips Chinese 200amp MMA ZX7-200 welder.
Anyway I saw one of these Draper 200amp spool welders advertise don T'interweb and thought that would be OK to have as a dedicated Mig brazing set-up for me, Currently I run mig braze wire through my R-Tech mig with a dedicated torch and liner, but I'm getting towards the end of my 12 kg brazing wire that cost almost as much as the mig welder did. For the future I would consider only buying the extremely dear 1kg reels. www.toolstop.co.uk/draper-00587-mma-to-mig-converter-200a-240v/?msclkid=63524a38f68e17c8e6ef2b5d402a8a51&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%20-%20Draper%20-%20Brand%20%2B%20Category&utm_term=4578160305759080&utm_content=Draper%20-%20Brand%20%2B%20Category