Cobbler
Codger bodger
- Messages
- 7,508
- Location
- Gloucestershire UK
I had a similar problem with a Fiesta, turned out it was the inner drive shaft joint. I took the drive shaft out by dropping the top ball joint off, this gave enough room to remove it leaving the other half in the box. When I put a finger up into the joint you could feel a groove where the rollers ran. The vibration shook the complete car particularly on acceleration, it started suddenly, not came on slowly & didn't always do it. I came to the conclusion that as the shaft was floating, sometimes the rollers didn't drop into the groove so it didn't shake