Cutting corrugated pvc sheets

[Mikey D]

Got a few of these hateful things to cut , so do please tell what do you use Fine tooth saw , like tenon saw not much good .
I was thinking 1mm cutting disc on grinder ?

Cheers mike

 

[mike os]

Angry grinder, try to support both sides

 

[roofman]

Got a few of these hateful things to cut , so do please tell what do you use Fine tooth saw , like tenon saw not much good .
I was thinking 1mm cutting disc on grinder ?

Cheers mike

yes this

 

[James1979]

^^^ +1

Use a 1mm or 0.8mm disk and support it each side of the cut.

Dont use a reciprocating saw or they shatter. Ask me how I know this..........

 

[Dave-sparks]

Slitting disc in a grinder,

 

[gaz1]

old wood saw can be used as well as its blunt enough to cut through the plastic

 

[brightspark]

slitting disk melt your way through even on a cold day

 

[8ob]

Top tip, make sure you cut them when they are warm. That`s coming from someone that's trashed a fair few trying to cut them cold.

Bob

 

[mtt.tr]

You might

Top tip, make sure you cut them when they are warm. That`s coming from someone that's trashed a fair few trying to cut them cold.

Bob

I'm in that club

 

[Mikey D]

You might

I'm in that club

Ok guys thanks for confirming my suspicions ,,cheers all Mike

 

[grim_d]

Angle grinder, slitting disc and clean up with a file if required.

I cut a round hole in one with the grinder...what a nuisance that was.

 

[Ubique]

Hot air gun with a focussing nozzle followed closely by a long blade. Or ask the manufacturer.