Compressor faulty, or am I stupid?

[jimbo1962]

Are you any wiser after all that?

 

[jo1010]

Size of compressor is like size of a garage - get more than you need







And then double it
200l tank, 32amp (assuming 240v supply) as minimum - which means you can spray paint too if you don't go mad

 

[Cook1e]

Sorry for late response, been busy elsewhere and then I found a brake fluid leak, which took priority over polishing.

I reduced the pressure to 50psi, but the grinder stalled too easily. 70psi seems to be the best compromise and the job is now done.

I have learned more than I needed to

I have had the compressor for several years, mostly used for windy gun, tyres and a bit of HVLP spray gun, for ACF50 corrosion inhibitor mostly, occasionally paint. I've used it with the die grinder from time to time, but this is the first time in extended use.

I was really just worried that my compressor was ******** again (it failed a few years ago, faulty valve block), but I'm pleased to have determined that it's working to spec.

Thanks for all the information and help. I'm well used to manufacturers/vendors making exaggerated claims, but in the field of air power, they absolutely excel!

 

[Cook1e]

Size of compressor is like size of a garage - get more than you need

And then double it
200l tank, 32amp (assuming 240v supply) as minimum - which means you can spray paint too if you don't go mad

Sound advice, but only practical if funds, space and planning permission are conducive which, in my case, they aren't.

A massive garage/workshop with a 3-phase supply and I would rule the world!