C Coldy New Member Messages 3 Location Kidderminster Jan 24, 2019 #1 Hi, I need to tack some washers onto a mount for a stainless exhaust. Whats gasless wire do I need and do I need a different tip? All advice welcome. Ta Coldy
Hi, I need to tack some washers onto a mount for a stainless exhaust. Whats gasless wire do I need and do I need a different tip? All advice welcome. Ta Coldy
rikrobson Member Messages 3,963 Location Perth, Scotland Jan 24, 2019 #2 I don't think you bvcann get gasless mig wire in stainless. You can get stainless wire but this need argon gas or at 90+ mix. You can get stainless arc rods if you have an arc welder
I don't think you bvcann get gasless mig wire in stainless. You can get stainless wire but this need argon gas or at 90+ mix. You can get stainless arc rods if you have an arc welder
rikrobson Member Messages 3,963 Location Perth, Scotland Jan 24, 2019 #3 Oh and stainless wire is not cheap
T Turbo Member Messages 6,092 Location Fermanagh, Northern Ireland Jan 24, 2019 #4 If it's just to tack on some washers you can buy a 1kg roll if normal mig s/s wire & you'll get away with your normal mix gas for mild steel.
If it's just to tack on some washers you can buy a 1kg roll if normal mig s/s wire & you'll get away with your normal mix gas for mild steel.
Kent Member Messages 9,992 Location Bowland, Lanacshire,UK Jan 24, 2019 #5 Frankly use the std wire within your machine already for this purpose. It's not perfect but neither does it need to be in the application .
Frankly use the std wire within your machine already for this purpose. It's not perfect but neither does it need to be in the application .