DestroyItYourself
Member
- Messages
- 154
- Location
- Edinburgh Scotland
to note i weld with the 150 and im welding 5mm via the 13 amp plug no problem other than forgetting its trip out when in use
so heres a quick guide for the 150/151
this is how i see it as reference points for clarke 150/151
done by sheet steel thickness
1 Min 0.8 sheet
A 2 Min 1/2mm
A 3 Min 2mm/3mm
1 Max 2mm/3mm
A 2 Max 4mm
A 3 Max 5mm
then adjust your wire speed to suit i set mine around 4/5 and adjust from there on any sheet thickness
Thanks man