Clarke 105en wiring diagram

[bloobloo]

I have a clarke 105en that I took the torch off to try it on another, well that as over 2 years ago..... i now would like to try the machine again, but cannot for the life of me remember where the torch wires go to....
I have connected the 2 brown torch wires to where i think they came from, but it didnt run right, no arc and IIRC it ended up blowing a fuse.
can anyone tell me where the two wires should go? Before I removed the torch, the welder worked perfectly. At the min the wire feed works as it should with no issues etc I just need to know exactly where the wires go. One of the wires connects to a spade connector, the other I think went somewhere on or near the rectifier. Any help greatly appreciated.

 

[rtbcomp]

Moved to the Clarke section.

Have a look in the links, there is a link to the Clarke Manuals download page.

 

[bloobloo]

Thanks rbt, but I already asked in the clarke section on classic 2cv's thread http://www.mig-welding.co.uk/forum/showthread.php?t=2855

I already downloaded the user manual but cant find anything in it that helps me with the wiring.

 

[bloobloo]

just a quick update, the wirefeed works as it should, welder powers up as it should the only problem is the arc, it is very very weak, basically just sparking and making the wire a bit hot. Nowhere near enough to actually melt it. I tried putting the earth lead into the positive earth to see if that made any difference but it popped the fuse in the welder so didnt try that option again. close to giving up now!