Changing plug on tig pedal.

[Macgyver]

so im having some issues cuz that wsme 200 acdc tigwelder has a plug that only that one uses, or 2 others that is identical.
and i wanned to buy somthing that i know works well and is a know brand. so my question is. can i remove the plug from other pedals and put this plug on ?

https://drive.google.com/folderview?id=0B2dUcQI-1qw_V0pwa0FRSldQYWs&usp=sharing

and if anyone have experience with this. is it easy to plug pins in a original plug ( http://www.ebay.com/itm/CPC-206044-...995296?hash=item2c9cd88020:g:zBkAAOSwgQ9VifBM )

i really dont know much of electric stuff, but i have a mate close by that happely helps me if i ask. but i dont know if this is somthing a common electric guy would know ? or maybe it is.

if not ill buy a parweld wsme 200 pedal. since its probably the cheepest of 2 i can choose between that comes with the plug allready.

i allso wanned to buy a wp 20 F watercooled tig torch
( http://www.ebay.com/itm/TIG-Welding...4f8cfaf&pid=100033&rk=3&rkt=4&sd=172084121472 )
and Apply the same trigger connector on that aswell, cuz i do alot of welding inside boxes and under and over things, ( aluminum ).
so being able to change connectors would really help me be able to choose the right torch.

 

[500e]

Made by AMP TYCO make sure you get correct conectors for body type & wire size

 

[Macgyver]

pinns for the female plugg? so it fitts same as the original plug ? and with wire size u mean the wire that u connect to the pinns inside the plug right, so its not loose when u solder it or pinch it ?

 

[500e]

They are really crimp there will be male & female connectors & pins & yes the wire size has to be within the parts size EG 20 to 24 swg for part ****** different part No's to cope with different wire sizes
there may be contacts with different size wire Amp connectors can be a nightmare the proper crimp tools are expensive as well, as bad as Cannon connectors

 

[Macgyver]

sounds like my best bet would be to email the provider or somthing and ask if thay could put that connector. or try to get some adapter for it. or just take the part off and ask someone in a electronic store to make a identical one.