After retiring from working in a automotive workshop all my life, I had always had access to good welding gear even for personal projects. But I needed to make another cave gate, and it had been many years since I last welded, and I did not want the hassle of gas, So I went and a brought a gas/gasless mig/tig/mma welder with good advice from this forum , after a few practice runs, it all started to come back to me, and was surprised just how clean the weld was (not much splatter at all). I managed to locate some 100mm x 50mm 3mm thick box section, this welded very nicely. This project used nearly 2kg of 0.8mm welding wire., so it was a good test for the welder which performed faultlessly. Looking forward to my next project.
Fitting in place, it is anchored down to solid bedrock using 10mm bolts.
Fitting in place, it is anchored down to solid bedrock using 10mm bolts.
Last edited by a moderator:
