capacitor

[normspanners]

Worth a watch from the beginning but the "O"s part starts at 2:18.

I was wondering----- if, after watching the brilliant two ronnies it was a case of 5:55 (exactly) or maybe even the billhooks at the very end of the sketch!!
But this is sketch is a very good analogy of this post, Even the entrance into the shop, and us trying to guess what is required , then a big pause and no helpful response, (whilst we are climbing the ladder to get the peas) to aid us, to advise him in return.
I am more than willing to help but we at least need the basic info to start with surely?

 

[octo0072000]

There used to be an ironmongers down Silver Street in Doncaster just like that, the guy behind the counter was even shorter than Ronnie Corbett.

that would be Butlers ironmongers was owned by a bloke called Fred gee a fellow scuba diver.
don't think he was the original owner, back half of shop on east laith gate ended up selling scuba gear then the place was sold then a night club last time i was in town it's boarded up

 

[the snooper]

Got any condensers, here you go sir one condenser for a stlll, no electrical condensers

 

[Freeweld]

Alright I'll ask What 2 capacitors ...
And welcome Richy

Hi!Newby here)I have a Kempi and i did not use it for a long time.Last week i try to weld some parts and after few minutes i heard a noise and a lot of smoke come from under the metal case.After i open the case i notice that there are 2 big capacitors that are burn bad and i can read just some of the specification from it.I attach some pictures in case someone here can tell me more about this capacitors and also from where i can buy them.

Thank you!

 

[Freeweld]

Another photo to help you understand where this capacitors come from.

 

[skotl]

...

Thank you!

Yup - that's bust!

 

[Freeweld]

Yup - that's bust!

Do you know what value(specification) have this capacitors?I had look on internet but for the code that i had found on one side of the capacitors i get diferent results.

 

[migmug]

Seems a lot have people have fun with those RIFA caps, have a read of http://www.vintage-radio.net/forum/showthread.php?t=69128
The problem is the capacitance value is writen on the top which is now black and the voltage is on the side that is burnt away.
The codes you can see is the date code and the family.
I would give the end a wipe, the uF is still there and you might be just able to see part of the the value.
The location for them is on the diagram just to the left of T001

If it was me I would look for one in the range 0.1 to 0.47uF 250V AC X2 capaitor.

 

[Freeweld]

Seems a lot have people have fun with those RIFA caps, have a read of http://www.vintage-radio.net/forum/showthread.php?t=69128
The problem is the capacitance value is writen on the top which is now black and the voltage is on the side that is burnt away.
The codes you can see is the date code and the family.
I would give the end a wipe, the uF is still there and you might be just able to see part of the the value.
The location for them is on the diagram just to the left of T001View attachment 64437

If it was me I would look for one in the range 0.1 to 0.47uF 250V AC X2 capaitor.

Hi migmug!I had follow your advice and i had give a shower to the capacitor .I had attach some photos maybe they will help other with the same problem like mine.

Thank's for the reply and have a nice weekend!

View attachment 64453