I'm building a fence on top of a concrete retaining wall. For the posts, I'm using metal post system called Postmaster, which are made of "structural steel with a heavy galvanized coating". More info about the post can be found here: http://contractors.masterhalco.com/Contract.nsf/woodbrochures?OpenForm
The problem is that, when the concrete was being poured, one of the posts shifted. The concrete is now dry and the post is leaning about 5 degrees.
Here's my question:
Can I bend this post if I apply heat with a MAPP torch, as shown here: https://www.screencast.com/t/5kKlncsVm
Any ideas and suggestions would be appreciated.
Thanks,
Fern
The problem is that, when the concrete was being poured, one of the posts shifted. The concrete is now dry and the post is leaning about 5 degrees.
Here's my question:
Can I bend this post if I apply heat with a MAPP torch, as shown here: https://www.screencast.com/t/5kKlncsVm
Any ideas and suggestions would be appreciated.
Thanks,
Fern